• Wholesales
• Translate

• Home |  Products |  About us |  Contact us |  FAQ |  Catalog |  Sitemap

• • • 1
    • Cable Tester for RJ11, RJ45, Coaxial BNC, 1394 (4-4pin), 1394 (6-4pin), 1394 (6-6pin), USB (male-female), USB (male-male
  • 
  • • 2
    • Network LAN Cable Tester
  • 
  • • 3
    • Lines Communication Scanning & Testing Device
  • 
  • • 4
    • wire locator locating&tracking buried wires
  • 
  • • 5
    • optical light source
  • 
  • • 6
    • handheld light source
  • 

• • 
    • BTPD0251
  • 
    • VOXL0011
  • 
    • CBRS0096
  • 
    • VOXL0012
  • 
    • VOXL0012S10
  • 
    • VOXL0012S06

• 
  
• Lines Communication Scanning & Testing Device
  • MODEL： WSS-AAD14

• • Lines Communication Scanning & Testing Device

  • 
    

    

    
    

    

    
    

    

    
    

    Introduction:
    On the basis of a long-termexperience of practice and as a scientific breakthrough, the model of the wire tracker is a all-purpose apparatus using for verifying communication cable which adopts an unique design for data transmission. And this celerity and precise muose has three functions including finding cable and verifying cable as well as testing the status of the circuit, which is really a apllied tool for technician to fix communication cable. And it can be used for telephone system and computer networks and relative site involving metal cable.

    
    

    Features:
    Breakthrough simulation type signaling
    Ends cable location confusion, decisively rejects noise and false signals
    Locates cable quickly from a distance, even on an active network
    Isolates cable and wiring precisely from a bundle, despite cable bleed
    Validates correct end-to-end cable wiring and identifies telecom/datacom services
    Scan cable-Proofreading cable automatic cut over function

    
    

    The Function of Checking Cables:
    this "CABLE TESTER" will help you to check and find the twin cables in need among so many cables in no time.
    Plug one port of the cable testing9such as the port of extension line or the port of computer network cable) into the RJ-45 jack or RJ11 jack on the emitter to the "SCAN" position. It shows anormal work if the "status" LED falshes.
    Push to test on the receiver and the "Power" LED flashes, then detect the sound "toot" from the speaker on the receiver around another port of the cable testing(such as cable layout shelf of telephone system, junction bos, and hub port of computer)
    Then compare the volume of the "toot" sound, the twin cables which makes the highest sound of "toot" are the one to be found.

    
    

    The Function of Verifying Cables:
    With the verifying function of the "CABLE CHECKER", it will be very fast to test the basic physical connecting feature of open and short and cable

    
    

    Sequence Status on The Cables Below:
    The UTP computer network cable which adopts the standard of 10 Base-t EIA/TIA 568A, EIA/TIA 568B, AT&T258A, Token Ring
    The telephone cable of 2 pin/4 pin
    Other metal connecting cable
    Plug one port of the cable testing into the RJ45 jack on the imitter(or connect them with cable adapter). Move the function switch on the emitter to the "TEST" position, it shows a normal work when the "VERIFY" LED flashes.
    Connect another port of the cable testing with the RJ45 jack on the receiver(or connect them with cable adapter). The status of good and NG of the cable circuit can be judged by the 4 indicator light on the emitter or on the receiver of cable status(as the illustrator in the table: 1, 2, 3, 4, 5, 6, 7, 8)

    
    

    Circuitry Status Testing:
    The circuitry status testing functions of "CABLE CHECKER" can determine the basic natures of testing circuit. The testing task can be complete only via the emitter, rather than receiver. Please insert one port of crocodile clipshaped adapter cable into the RJ11 socket of the emitter, then let the testing circuit help tightly by the red-black cable clip located in other end of the adapter.

    
    

    Low Voltage Alarm Function:
    Push DIP switch on emitter to position of "SCAN", in case that battery level is lower than 6.0V, "STATUS" and "VERIFY" indicators will light up at the same time, it means battery replacement is needed.

    
    

    Package Including:
    1*Launcher
    1*Receiver
    2*6F22 9V Batteries
    1*RJ-11 Telephone Cable
    1*RJ-45 Network Cable
    1*Cable with Crocodile Clamp
    1*2.5mm White Earphone
    1*Instruction for Use

• Product Tags：

• A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

  Icablelink is a B2B online trading platform that leading in China.There are over hundreds of thousands of global buyers purchase products that made in China through Icablelink for competitive prices with good quality.
  Icablelink works with DHL,UPS,FEDEX and other logistics companies for global buyers to provide one-stop online shopping service,at the same time protects the interests of buyers.

• • Cable Tester
  • Earphones FAQ
  • EasyCap
  • FAQ-Computer Connector & Adapter
  • FAQ-DB9 Cable

Copyright 2006-2024 icablelink.com All Right Reserved.